Tag: leak prevention

  • How To Winterize Your Pool To Prevent Leaks

    How To Winterize Your Pool To Prevent Leaks

    [vc_row][vc_column][vc_single_image image=”30387″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]If you live in an area with cold winters, you know that your pool can suffer during this season. Here are some common winter pool problems and how to prevent them.

    One of the most common winter pool problems is freezing. This can damage your pool pump, filter, and other equipment. It can also cause cracking and other damage to your pool itself. To prevent freezing, keep your pool covered when it’s not in use. You can also invest in a heater to keep the water at a consistent temperature.

    Another common problem is algae growth. Algae thrive in warm, moist environments – exactly what your pool provides during winter. To prevent algae growth, regularly clean your pool and keep the pH levels balanced. You can also use algaecides and other products to keep algae at bay.

    Finally, winter weather can also take a toll on your pool deck. Snow and ice can make the surface slippery and dangerous. To avoid accidents, regularly clear your deck of debris and keep it free of ice and snow.

    How To Winterize Your Pool

    If you live in an area with cold winters, you’ll need to take special care to prep your pool for the season. Here are a few tips to help you get started:

    1. Drain your pool

    This is the most important step in prepping your pool for winter. You’ll need to drain all the water from the pool so that it doesn’t freeze, crack the liner, or damage the pump.

    Assuming you have an in-ground pool, there are a few things you’ll need to do to drain it properly. First, you’ll need to locate the main drain at the bottom of the pool. This is usually located near the deepest part of the pool. Once you’ve found the main drain, you’ll need to attach a hose. Be sure to use a long enough hose to reach from the pool to an area where the water can be safely discharged.

    Next, you’ll need to open the skimmer valves and any other valves that may be present in your pool’s filtration system. This will allow water to flow out of the pool and into your hose.

    Once the water level in the pool has dropped below the main drain, you’ll need to start the pumps to begin circulating the water out of the pool. You may need to run the pumps for several hours to drain the pool completely.

    Once the pool is completely drained, be sure to disconnect and remove all hoses and other equipment that you used to drain the pool. You should also give the pool a good cleaning before refilling it.

    2. Clean the pool

    Now is a good time to give your pool a thorough cleaning. Assuming you have an in-ground pool, there are a few things you’ll need to do to clean it. First, you’ll need to vacuum the entire pool. This includes the floor, walls, and stairs. Be sure to move slowly so that you don’t miss any spots.

    Next, you’ll need to brush the walls and stairs. This will help loosen any dirt or debris clinging to them. Once you’re done brushing, be sure to vacuum the areas again.

    Finally, you’ll need to clean the filter. Depending on your filter type, this may require backwashing or simply replacing the filter cartridges. Consult your owner’s manual for specific instructions.

    3. Cover the pool

    You’ll need to cover the pool to protect it from the elements. If you have an in-ground pool, consider covering it when it’s not in use. Pool covers come in various materials and styles and can offer many benefits, from keeping your pool clean to reducing energy bills. Here’s a quick guide to choosing and using a pool cover.

    Pool covers can serve various purposes, from protecting your pool from debris and animals to keeping it warm or cool, depending on the season. A cover can also help reduce evaporation, saving you money on water bills. And if you have young children or pets, a cover can provide an extra layer of safety.

    Several types of pool covers are available on the market, each with its own set of benefits. Mesh covers are designed to keep out leaves and other debris, while solid covers provide a complete barrier against the elements. Solar covers help trap heat in the water, making your pool warmer and extending your swimming season. And safety covers can help prevent accidental drownings by completely covering the pool when it’s not in use.

    When choosing a pool cover, you’ll need to consider the size and shape of your pool and the climate where you live. You’ll also want to consider your budget and whether you want a permanent or temporary cover. Once you’ve narrowed your choices, it’s a good idea to consult a pool professional to find the best cover for your needs.

    4. winterize the pump

    If you have an above-ground pool, you’ll need to winterize the pump, so it doesn’t freeze and break. This involves draining all the water from the pump and then adding a glycol solution to protect it from freezing.

    These simple tips will help ensure that your pool is ready for winter. By taking the time to prep your pool now, you’ll be able to enjoy it all summer long![/vc_column_text][/vc_column][/vc_row]

  • Two Deadly Leaks To Watch Out For During the Winter

    Two Deadly Leaks To Watch Out For During the Winter

    [vc_row][vc_column width=”1/2″][vc_single_image image=”30377″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_column_text]There are two main types of gas leaks – carbon monoxide and natural gas. Both can be extremely dangerous, but they affect the body differently.

    Carbon monoxide is colorless and odorless that can be deadly if inhaled. It prevents the blood from carrying oxygen to the cells, causing suffocation. Symptoms of carbon monoxide poisoning include headache, dizziness, nausea, and chest pain.

    Natural gas is colorless and odorless but is not as deadly as carbon monoxide. However, it can still cause serious health problems if inhaled. Natural gas can cause headaches, dizziness, nausea, and vomiting. It can also cause an irregular heartbeat and difficulty breathing. If you believe there is a gas leak, you must get to fresh air immediately and call your local utility company.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Carbon Monoxide Leaks

    One of the most dangerous residential gas leaks during winter is carbon monoxide. Carbon monoxide does not have a color or odor. This gas can be deadly if inhaled. If you suspect a carbon monoxide leak in your home, evacuate immediately and call 911. Common symptoms of carbon monoxide poisoning include headaches, dizziness, nausea, and vomiting. If someone in your home has these symptoms, get fresh air and seek medical attention immediately.

    If you suspect a gas leak, it is important to take action immediately. Here are some steps to take:

    1. Get fresh air immediately.

    2. Turn off all appliances and sources of ignition.

    3. Open doors and windows to ventilate the area.

    4. Call your gas company or the fire department to report the leak.

    5. Do not re-enter the area until a professional has determined it safe.

    If you experience any symptoms of carbon monoxide poisoning, such as headaches, dizziness, nausea, or confusion, seek medical attention immediately. Carbon monoxide exposure can be deadly, so it is essential to take any gas leak seriously and act swiftly to avoid serious health consequences.

    Natural Gas Leaks

    Another dangerous gas leak during winter is natural. Natural gas is highly combustible and can cause an explosion if it comes into contact with an ignition source. If you suspect a natural gas leak, evacuate immediately and call your local utility company or 911. Symptoms of a natural gas leak include a hissing sound, the smell of rotten eggs, and dizziness. If you or someone in your home has these symptoms, get fresh air and seek medical attention immediately.

    If you suspect a gas leak in your home, don’t try to fix it yourself. Evacuate immediately and call 911 or your local utility company. Gas leaks are hazardous and can be deadly. Don’t take any chances- get to safety and let the professionals handle it.[/vc_column_text][/vc_column][/vc_row]

  • Familiar Sources of Home Water Leaks

    Familiar Sources of Home Water Leaks

    [vc_row][vc_column][vc_single_image image=”30342″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Almost all components of your home will experience wear and tear over time. Even the best contractors cannot build something that will last forever. As your home or business ages, so do the fixtures, fittings, pipes, and utilities. A great way to stay one step ahead of a pesky water leak is to see the warning signs before the issue worsens. Below are some of the most common sources of water leaks and how to detect the problem.  

    Washing Machines

    Regarding water consumption, the laundry room is second only behind the bathroom. This means that paying attention is a good idea if you notice water collecting outside the washing machine.      

    Clogged Water Pipes

    A water pipe clog can lead to water and sewage leaks. Your main culprits are usually going to be your kitchen drain sink. Many kitchen sink drains become clogged when grease or other debris builds up. Toilet pipes can also become blocked when too much toilet paper is used, or something is flushed down the lines that cannot fit down the pipe. 

    Corrosion, Joints, and Fittings 

    Older homes commonly used galvanized steel or cast iron for water pipes. These materials have a much shorter lifespan than PEX or even PVC piping which is widely used today. Rust, calcium buildup and deterioration will cause these pipes to crack and leak. Often, these leaks will happen behind walls, under flooring, and even beneath concrete slabs. If you suspect a water leak has occurred, contact a leak detection specialist as soon as possible.  

    Loose Connections or Excessive Water Pressure 

    We all like a nice shower with good water pressure. However, when your water pressure is too high, it can cause undue stress on your pipes and faucets. Plumbers or manufacturer instructions should let you know what your pressure settings should be set to. Loose connections are prone to water leaking, especially if your water pressure has been set too high.  

    Extreme Temperature Changes 

    Utah is known for how quickly and drastically our temperatures can change.  Pipes expand when they heat up and contract when they get too cold. Sudden changes can cause your pipes to crack and break, especially when quickly plummet to freezing temperatures.  

    Fight Against Water Leaks

    Homeowners today have way more tools at their disposal to fight against leaks and the damage they can cause to our homes. If you suspect that you have a water leak, we invite you to contact us today. Our skilled technicians can pinpoint the source of the leak and provide a comprehensive list of solutions. We can also install automatic leak detection sensors that automatically shut off your water until the problem can be fixed.   [/vc_column_text][/vc_column][/vc_row]